|
|
|
| Check Out Our
ebay
Auctions!
Summer Hours
Mon: 9:00am - 7:00pm
Tue: 9:00am - 7:00pm
Wed: 9:00am - 7:00pm
Thu: 9:00am - 7:00pm
Fri: 9:00am - 7:00pm
Sat: 9:00am - 5:00pm
Sun: Closed
March 1st - October 31st
Proud Sponsor of the Milwaukee HOG Chapter
| |
|
Click here for Winter Storage Information.
The Dynojet 250 – the crown jewel of the service department!
If you've made component changes to your bike, you'll want to see the difference in power.
When you put your bike through a Dyno run, you'll be impressed by the whole process and by the added horsepower that results. You could feel like you are driving a different bike than you brought in! |  |
The Dyno is used for two basic purposes:
-
performing diagnostic work
-
horsepower performance assessment
The Dyno consists of a carriage that holds the motorcycle chassis, a drum of a given weight which we accelerate using the rear tire, an electric motor that is used as a brake, and a computer that controls all of the Dyno functions.
We use the Dyno to diagnose interference problems and damaged motor mounts on rubber-mounted models.
The DYNO can also be used to measure incremental improvements in horsepower and torque.
|
 |
Ignition tuning can be accomplished by making a run on the Dyno, changing the ignition timing and then making another run to determine the affect on horsepower and torque.
Our Dyno is outfitted with an oxygen sensor that can tell how correctly the carburetor jetting or fuel injection mapping is, and allow us to make corrections.
|
 |
Customers going on a long trip should consider checking their bikes on the Dyno at the same time as their pre-trip service to make sure that everything is OK before you go. We offer Dyno check ups all year long for $45 plus tax.
|
 The DynoJet 250 Load Control System |
Maintanence Check Up Menus
Click model type for menus!
|
SERVICE HOURS:
Mon: 8:00a.m. - 6:00p.m.
Tue: 8:00a.m. - 6:00p.m.
Wed: 8:00a.m. - 6:00p.m.
Thu: 8:00a.m. - 6:00p.m.
Fri: 8:00a.m. - 6:00p.m.
Sat: 9:00a.m. - 2:00p.m.
Service FAQs. |
|
| Winter Storage |
|
|
|
 |
|
|
|
|
